Perfect use management standards, can make labor protective equipment in the controlled state correctly play a role, effectively protect the safety and health of employees. The contents shall include: correct selection, use, on-site storage, maintenance, replacement, training personnel to master the necessary knowledge, daily supervision, etc.
1. Identify the risk factors in each workplace and provide the correct type of personal labor protection supplies
Labor protection products are designed to protect against specific risk factors. Once the wrong choice, great harm. In each identified risk factors of the work site or equipment, clearly marked the need to wear labor protective equipment. The mark can eliminate the doubt of the practitioner on whether to wear labor protection products, and remind the practitioner to wear labor protection products here.
2. Train practitioners to properly use and maintain their own labor protection supplies
Through appropriate guidance, demonstration, employee trial and other training means, through oral and written two ways, tell each employee who needs to wear labor protective equipment: ① why must use labor protective equipment; ② When and where it needs to be used; ③ How to use; ④ How to keep it; ⑤ Points for attention in use. Ensure the correct use of labor protection equipment. Training must be understood and used by everyone.
3. Provide proper storage space for labor protection supplies
Specify where and how to store it. If the labor protection articles stored inside cannot be seen directly, the name, quantity and other information of the labor protection articles stored should be clearly marked outside the storage place, and convenient access and checking should be ensured. Return to your place immediately after use.
4. Maintenance and replacement of labor protection supplies
The efficiency of any labor protection products may decrease with time and repeated use. In order to ensure the normal use of labor protection products, correct maintenance is very necessary. To do this, you should establish a maintenance plan. Designate a group of people responsible for the maintenance of personal protective equipment so that all workers who use it know how to store, regularly clean and maintain it, and who is responsible if anything goes wrong. Provide material support for cleaning, e.g. good flushing and cleaning facilities.

5. Daily supervision is the guarantee of effective operation of the system
It is not every day that hazards in the workplace cause death, injury and illness. This gives workers the illusion that protective equipment is not needed. Therefore, it is necessary to enhance the safety awareness of workers and strengthen management in combination with appropriate management means.
According to the size of the enterprise, the user shall establish a safety organization or set up a full-time (part-time) safety supervision personnel to make regular inspections of different workplaces, identify hidden dangers and unsafe behaviors, including checking whether labor protective equipment is not used in the positions requiring the use of labor protective equipment. Safety inspectors must correct wrongdoing as soon as they discover a problem and create a written record of unsafe situations. Employees who use labor protective articles correctly should be encouraged, and those who do not use labor protective articles should be criticized and educated, and they should persevere.
Before supervision and inspection, personnel training, inspection plan, inspection list and other preparatory work should be done. The purpose, scope, time and participants of the inspection should be clearly defined. Problems found during the inspection should be rectified in time. The results are summarized and evaluated, and the "no" word analysis method is used to propose improvement targets for each link in view of the unsuitability, imperfection, dissatisfaction and insufficiency of each link and in combination with the resources of the unit. Through little by little improvement, gradually reach the ideal state.
2. Scrap of labor protection supplies
When labor protection articles are damaged, fail to test their protective function or exceed their validity period, they should be cleaned out from the site in time and destroyed under the supervision of specially-assigned personnel. The type, quantity, source and reason of destruction of the labor protective articles to be destroyed shall be recorded in detail, and shall be filed after being signed by the personnel in charge and supervisors. Invalid labor protective articles are strictly prohibited to leave the country to avoid accidents caused by misuse.